Hello,
there is a new p2p serverless Instant Messenger out: Open, Pyhton, excrypting everything.
Would it be possible that GA JIM developers integrate this Messenger Protocol and system / Gui as well in GAJIM ??
Then Cspace users, which need a gateway to AOL MSN JAbber etc, could use GAJIM. And the CSpace Developers could keep the Cspace free from GATEWAYS,w hich woudl only bloat their software now, as we need a secure only environment and a Cspace only client.
So Gajim with Cspace support would be perfect, maybe you could have a look at the python code and integrate it in Gajim,
here is the website, see as well the Trac-Wiki with Suggestions and the Mailinglist about the gateways...
if you want to contact the developers, use the CC mailers.
thanks a lot. any feedback?
I can't speak for the developers, but from what I know of Gajim it isn't aspiring to be a multiprotocol instant messaging client. Gajim gets it's ability to talk to users on other instant messaging networks by using the Jabber/XMPP protocol to talk to special gateways (known as transports).
CSpace users could use a similar method to connect to other instant messaging services from the native CSpace client.
I'd also suggest creating a CSpace plug-in for Gaim. Gaim is designed to support many different instant messaging protocols through the use of plugins.
On Fri, 2006-08-04 at 19:39 +0200, thomasasta@gmx.net wrote:
there is a new p2p serverless Instant Messenger out: Open, Pyhton, excrypting everything.
Would it be possible that GA JIM developers integrate this Messenger Protocol and system / Gui as well in GAJIM ??
Then Cspace users, which need a gateway to AOL MSN JAbber etc, could use GAJIM. And the CSpace Developers could keep the Cspace free from GATEWAYS,w hich woudl only bloat their software now, as we need a secure only environment and a Cspace only client.
So Gajim with Cspace support would be perfect, maybe you could have a look at the python code and integrate it in Gajim,
here is the website, see as well the Trac-Wiki with Suggestions and the Mailinglist about the gateways...
if you want to contact the developers, use the CC mailers.
ok, IMHO Cspace does not need multiprotocol,
how do we get in jabber a transport for the new messenger
then ?
-------- Original-Nachricht -------- Datum: Fri, 04 Aug 2006 14:05:33 -0500 Von: "Jeffrey C. Ollie" jeff@ocjtech.us Betreff: Re: [Gajim-devel] p2p python instant messenger integrated in GAJIM (pyhton)
I can't speak for the developers, but from what I know of Gajim it isn't aspiring to be a multiprotocol instant messaging client. Gajim gets it's ability to talk to users on other instant messaging networks by using the Jabber/XMPP protocol to talk to special gateways (known as transports).
CSpace users could use a similar method to connect to other instant messaging services from the native CSpace client.
I'd also suggest creating a CSpace plug-in for Gaim. Gaim is designed to support many different instant messaging protocols through the use of plugins.
On Fri, 2006-08-04 at 19:39 +0200, thomasasta@gmx.net wrote:
there is a new p2p serverless Instant Messenger out: Open, Pyhton, excrypting everything.
Would it be possible that GA JIM developers integrate this Messenger
Protocol and system / Gui as well in GAJIM ??
Then Cspace users, which need a gateway to AOL MSN JAbber etc, could use
GAJIM. And the CSpace Developers could keep the Cspace free from GATEWAYS,w hich woudl only bloat their software now, as we need a secure only environment and a Cspace only client.
So Gajim with Cspace support would be perfect, maybe you could have a
look at the python code and integrate it in Gajim,
here is the website, see as well the Trac-Wiki with Suggestions and the
Mailinglist about the gateways...
if you want to contact the developers, use the CC mailers.
I would recommend looking at PyMSNt and PyICQt for inspiration:
http://delx.cjb.net/pymsnt/ http://pyicq-t.blathersource.org/
On Fri, 2006-08-04 at 21:33 +0200, thomasasta@gmx.net wrote:
ok, IMHO Cspace does not need multiprotocol,
how do we get in jabber a transport for the new messenger
then ?
Hi
thanks for the suggestions. As said, I think a gateway in http://Cspace.in is not necessary, as we mix up secure and insecure chats and Cspace needs other development than multiprotocol, though, other jabber clients should integrate Cspace, either as a code to get a multiclient or with a transport. The suggestions are quite fitting, but I think you did not get th earchitecture of CSpace, so test around please.
The messenger is a p2p decentral messenger based on a kademlia dht. All is encrypted in secure channels. This means creating a transport is quite impossible, we would need one transport server, forwarding the message from jabber user to the C-Space ID-User, this means e.g. several users get from the same server the RSA-Key as the sender (forwarder) of the message. This would mix up the system, so only the client can integrate CSpace as a hybrid version.
This is requested and recommended, and if two users could switch to cspace in Jabber to jabber client, than they should leave jabber for secure Cspace protocol... of course this is very acid to jabber as here a leave of the jabber identity is necessary... But otherwise I see ne technical solution, if you have no idea to this problem.
So how could a jabber transport be organized in to a p2p system ??? The transport server then needs to deliver all messages to a certain RSA-key, found on the kademlia dht. And this means, that eihter the server or the jabber client needs to get a RSA-Key too.
But for a server this makes no sense, as then there is only one KEY for several users as said, and then we are again at the model, that every client needs a RSA-Key.
this means only the cleints can get hybrid with Cspace.
There was a long time ago the question for encrypted jabber, why we need servers, if they route white node traffic, they cannot read. So a server architecture of encrypted messages is nonsense and they could to it IP to IP. They only need a lookup service to get the IP adress or RSA-key of the client.
Once this understood, with the first coded p2p Messenger, which is now out with CSpace, we can get rid of the jabber servers.
This lead to a total re-definition of jabber, and we do not need jabberservers anymore. As this is as well the jabber developer list, I want to make the discussion more wider to change the Jabber brand to Cspace protocol and clients.
*THIS* must be jabber. Jabber needs to get rid of the servers, as emule with kademlia has as well the option to work without servers.
And for this purpose each client needs to implement CSpace, or lets say more freindly kademlia (but kompatible with Cspace)... Like Emule implemented Kademlia.
understood the revolution/turnaround?
We need RSA-Key´s not jabberservers in the announcement of Messenger profiles. So this needs to be discussed in the next jabber conference and we need the first python clients getting hybrid with Cspace as this is the most easiest to start with python written jabber clients.
Thanks
-------- Original-Nachricht -------- Von: "Jeffrey C. Ollie" jeff@ocjtech.us
I would recommend looking at PyMSNt and PyICQt for inspiration:
http://delx.cjb.net/pymsnt/ http://pyicq-t.blathersource.org/
Von: "Norman Rasmussen" norman@rasmussen.co.za
Sounds like something, someone with some twisted or xmpp.py experience (and some time) could look at. http://twistedmatrix.com/trac/ http://sourceforge.net/projects/xmpppy/
On 8/4/06, thomasasta@gmx.net thomasasta@gmx.net wrote:
ok, IMHO Cspace does not need multiprotocol,
how do we get in jabber a transport for the new messenger
then ?
-------- Original-Nachricht -------- Datum: Fri, 04 Aug 2006 14:05:33 -0500 Von: "Jeffrey C. Ollie" jeff@ocjtech.us Betreff: Re: [Gajim-devel] p2p python instant messenger integrated in
GAJIM (pyhton)
I can't speak for the developers, but from what I know of Gajim it
isn't
aspiring to be a multiprotocol instant messaging client. Gajim gets it's ability to talk to users on other instant messaging networks by using the Jabber/XMPP protocol to talk to special gateways (known as transports).
CSpace users could use a similar method to connect to other instant messaging services from the native CSpace client.
I'd also suggest creating a CSpace plug-in for Gaim. Gaim is designed to support many different instant messaging protocols through the use
of
plugins.
On Fri, 2006-08-04 at 19:39 +0200, thomasasta@gmx.net wrote:
there is a new p2p serverless Instant Messenger out: Open, Pyhton, excrypting everything.
Would it be possible that GA JIM developers integrate this Messenger
Protocol and system / Gui as well in GAJIM ??
Then Cspace users, which need a gateway to AOL MSN JAbber etc, could
use
GAJIM. And the CSpace Developers could keep the Cspace free from GATEWAYS,w hich woudl only bloat their software now, as we need a
secure only
environment and a Cspace only client.
So Gajim with Cspace support would be perfect, maybe you could have
a
look at the python code and integrate it in Gajim,
here is the website, see as well the Trac-Wiki with Suggestions and
the
Mailinglist about the gateways...
if you want to contact the developers, use the CC mailers.
--
-
Jeffrey C. Ollie -
thomasasta＠gmx.net